HobbyKing
ELECTRIC EXPANDER - 140 AMP
| Pack Voltage | 0 to 50V (70v with HV recorder option) |
| Pack Current | 0 to 140 Amps, in approx 70 mA increments |
| http | //www.eagletreesystems.com/Support/Manuals/ElectricExpander.pdf |
lectric Expander Specifications:,
Measures motor battery pack current and voltage. E Further reading ...5 Reviews
HobbyKing
TBS MINI PROGRAMMABLE SOUNDUNIT
| Can be fully configured with free PC software | Download from the files Tab below |
| Dimensions | 55x25x10mm |
| Note | Extension wire shown in the photo not included. |
Features:, Fully customer programmable., Technical Spec:, Supplyrange:, 3.5~12V (from receiver), Internal amplifier:, 1.2W at 8 Ohm and 5V supply, Switching outputs:, Minus switching, max. 12V/0.5A each, Weight:6g,
This soundunit is developed specially for electric powered airplanes. And ...5 Reviews
HobbyKing
SPINNER 75DIAM / 4.17MM SHAFT
| Weight | 161g |
5 Reviews
HobbyKing
X8 R9 9CH 2.4GHZ RECEIVER (LONG ANTENNA)
| Size | 57 X 32 X 10mm (2.24 X 1.25 X 0.39 inch) |
| Weigth | 10g |
| Antenna | 30cm |
5 Reviews
HobbyKing
TURNIGY PLUSH 25AMP SPEED CONTROLLER
| Cont Current | 25A |
| Burst Current | 35A |
| BEC Mode | Linear |
| BEC | 5v / 2A |
| Lipo Cells | 2-4 |
| NiMH | 5-12 |
| Weight | 22g |
| Size | 24x45x11mm |
| (Maximum) | 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles). |
5 Reviews
HobbyKing
MULTI-REMOTE RECEIVER OPERATED ON/OFF SWITCH
| Input voltage | 6~12V |
| Weight | 15g |
5 Reviews
HobbyKing
RCG 50CC GAS ENGINE 5.2HP/7500RPM
| Performance | 5.2hp @ 7500rpm |
| Idle | 1350rpm |
| Thrust | 13.6kg @ 100mtr / 11.5kg @ 1800mtr (Above sea level) |
| Suggested prop | 22x8, 22x10 |
| Spark Plug | CM6 |
| Bore/Stroke | 44 x 35mm |
| Compression | 7.5 |
| Weight | 1360g |
Ratio of lubricating capacity: 30:1,
RCG quality engines have proven themselves the world over for ...5 Reviews
HobbyKing
ALLOY GAS-TO-E CONVERSION MOUNT (43/42MM)
: 9.5g, : 42mm, Width:43,
Light weight composite alloy makes this mount very light and ...5 Reviews
HobbyKing
BMS-376DDG DIGITAL SERVO 1.5KG / .11SEC / 9.8G
| Weight | 9.8 grams / 0.41oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.5kg/cm , 21 oz/in |
| Torque At 6.0V | 1.9kg/cm , 26 oz/in |
| Speed At 4.8V | 0.11sec / 60 deg at no load |
| Speed At 6.0V | 0.09sec / 60 deg at no load |
2 Reviews
HobbyKing
TURNIGY 540S V-SPEC INRUNNER W/ IMPELLER 1350KV
| Diameter of shaft | 5mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 1350kv |
| Max current | 40A |
| No load current | 2.1A |
| Internal resistance | 75.2ohm |
| Data | 3S 11.1V |
| Prop | APC7x4, APC10x4.7 |
| Max Current | 16.6A, 37A |
| Pull | 720g, 1260g |
| Prop | APC7x4 |
| Max Current | 29A |
| Pull | 1100g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 52mm x 36mm, 66mm(with shaft), Weight:, 141g (kv1350) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
TURNIGY T600 BRUSHLESS OUTRUNNER FOR 600 HELI (1100KV)
| Weight | 369g |
| Turns | 10T |
| Voltage | 5~7S |
| Max Current | 110A |
| Diameter of shaft | 6mm |
| Length of front shaft | 21.5mm |
| ESC | 100~120A |
Specifications:, Dimension:, 58mm x 49mm, 78mm(with shaft), Kv:1100rpm/V,
Is your 600 heli ready for the next level in ...5 Reviews
HobbyKing
SUPER GOLD THIN ODORLESS CA GLUE 1. OZ (FOAM SAFE)
,
Super Gold Thin Odorless CA 1. oz SUPER-GOLD are our ...5 Reviews
HobbyKing
3DSPINNER FOR HP-50 / DLE55 / DA50 / JC51 (41X41X26MM) GOLD
| Shaft size | 10mm |
| Bolt hole | 5mm |
5 Reviews
HobbyKing
BMS-706MG LOW PROFILE HIGH SPEED SERVO (METAL GEAR) 4.6KG / .13SEC / 32G
| Weight | 32g / 1.12oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 4.6kg/cm , 65 oz/in |
| Torque At 6.0V | 5.4kg/cm , 73oz/in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
| Speed At 6.0V | 0.11 sec / 60° at no load |
5 Reviews
HobbyKing
BMS-375DMG DIGITAL SERVO (METAL GEAR) 1.6KG / .13SEC / 11.4G
| Weight | 11.4 grams / 0.44oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.6kg/cm , 22 oz/in |
| Torque At 6.0V | 2.3kg/cm , 28 oz/in |
| Speed At 4.8V | 0.13sec / 60 deg at no load |
| Speed At 6.0V | 0.11sec / 60 deg at no load |
5 Reviews